A comprehensive summary of requirements will help both the landlord or managing agent and the installer to minimise misunderstandings. The clearer the specification, the more likely it is that an efficient and cost-effective solution will be reached.
The specification should include:
Including the location within each unit.
Satellite, terrestrial, DAB, FM radio etc.
For installers and products used.
You should discuss the requirements for signals delivered to all outlets carefully with prospective installers. Recommended values can be found in the R-Book 5: Installing Digital Television, MATV and IRS.
Ofcom has published details of the transmission characteristics which the television transmitter network will adopt at switchover. This information is primarily intended to help systems installers make initial preparations for switchover. Further details can be found on the Ofcom website.
To avoid vandalism or accidental damage, both internal and external cabling may need to be routed out of reach at high level, concealed and protected.
Head-end equipment and multi-switches must be located securely, but accessible to authorised maintenance personnel.
All equipment, including cabling, should be clearly labelled in a legible way, so that it can be identified from the installation drawings.
Hazardous materials, e.g. asbestos, should be identified and safe access provided. Where appropriate, property managers should agree to provide details of residents with specific needs and issues (within the boundaries of confidentiality laws).
Local Authority guidelines on noise levels, acceptable hours for noisy work in residential areas, waste disposal etc should be adhered to.
Provision should be made for recording "as-installed diagrams" and "acceptance test" results.
A warranty period of at least one year should be included, covering all labour and materials. A service-level agreement specifying contact methods and guaranteed response times should also be included. Similar information should be provided if the tender offers ongoing maintenance. Maintenance requirements should include periodic inspections for corrosion and safety. Where existing equipment is reused, the installer will not generally give a warranty for the performance of the reused parts.
Residents will need to know that services will continue during work being carried out. Short breaks of a few minutes may be needed, but even short breaks should be agreed in advance.
Information as to how this will be achieved.
As a result of digital switchover, most current DTT transmissions will need to change frequencies. Public service channels will generally move into channels formerly used by analogue services, though there will be some local exceptions. At most locations, some new frequencies will be brought into use for digital TV services.
Most IRS and MATV systems contain signal processing equipment that is tailored to the channels currently in use in a particular area. Where changes are brought into use at switchover, it is likely that changes to channellised filters will be required, involving a visit to each MATV or IRS head-end.
It is clearly helpful for the system supplier to account for any changes in frequencies before switchover - ideally before installation. However, as information about changes will only be available close to the switchover date in each region, installers should, for the time being, offer flexibility to allow for modification of upgraded head-ends at some point before switchover. For more detailed information.
Much of the technical information needed to build a suitable specification can be found in:
Still can't find what you're looking for? Call our contact centre:
Opening hours: Mon - Fri 9am - 7pm, Sat 10am - 4pm. Extended opening hours on switchover dates.
