Basic re-tuning

Basic re-tuning is quick and easy and needs to be done at each stage of switchover or on any other occasion you find you are missing channels.

• Step-by-step guide to basic re-tuning

Manual re-tuning

If you have missing channels after having done a basic re-tune, or the wrong regional services, you may need to do a manual re-tune to select where services appear on the channel list (EPG). You can do this using the instructions below.

Your manual re-tune instructions for today

These instructions assume you are using the Sudbury transmitter. If you know you get your signal from a different transmitter, click here.

	21 May 2012
Group 1 help icon	ch 44
Group 2 help icon	ch 41
Group 3 help icon	ch 49
Group 4 help icon	ch 54
Group 5 help icon	ch 63
Group HD help icon	ch 47

1. Using your remote control, press the 'menu' button.
2. Select the 'set up' or 'installation' option. If you see picture icons, select the tool box, satellite dish or spanner.
3. Select 'manual re-tune' or 'manual search'.
4. If you are prompted for a code, try 0000 or 1234.
5. For Group 1 (BBC Services) type in 44 where it asks for a 'channel' number (frequency) and press OK.
6. Repeat steps 1-5 using the different numbers next to each "Group"
   (a group is a bundle of TV services), to complete the manual re-tune. Group 2: 41, Group 3: 49, Group 4: 54, Group 5: 63, Group HD: 47
7. Then press 'menu' or 'exit' to finish.
8. NB: These instructions should work for most Freeview TVs or boxes, but they differ, and you may have to speak to your manufacturer for help.

• Download and print instructions

• Email instructions

Please note, further re-tuning will be required (including at each stage of the digital switchover) and the channel numbers (frequencies) could change. Look at the full table below for further re-tune dates.