700MHz clearance

Clearance engineering work at the Mendip transmitter

Latest industry news

Clearance changes for Q4 2019 published -  16 July 2019

Dates and details of technical changes at transmitters for the 700MHz clearance programme in Q4 2019 have been published.

Full details for Q3 and Q4, including UHF channel changes, are available here.

This page also includes other briefings for industry.

Information for viewers is available on the Freeview website at freeview.co.uk/tvchanges

A list of clearance events completed in Q1 and Q2 2019 can be found here.

A list of clearance events completed in 2018 can be found here.

A list of clearance events completed in the STV region during 2017 can be found here.

What is 700MHz clearance?

In November 2014 Ofcom announced its decision to reallocate some of the airwaves used by Freeview to mobile services. A similar process is being carried out across Europe, as spectrum is reassigned to meet a predicted increase in demand for mobile data. As a result, some Freeview channels will need to move to new frequencies. This process is known as 700MHz clearance.

How will clearance affect viewers and channel providers?

Most Freeview viewers will simply need to retune their TV equipment when this change takes place in their area. However, Ofcom has stated that between 140,000 - 270,000 homes may also need to either replace or realign their aerial to continue receiving all available channels.

As part of 700MHz clearance, Ofcom states that:

  • 14-20m homes will need to retune their TV equipment
  • 100,000 -160,000 homes may need to replace their aerial
  • 40,000 - 110,000 may need to have their aerial realigned
  • A small number of households may need to change TV platform

Most Freeview viewers are familiar with retuning and do so from time-to-time to update their channel line-up - where TV equipment does not do this automatically. In some cases, more than one retune may be required where clearance takes place in multiple stages.

Aerial changes are most likely to be needed where TV services are broadcast in the aerial group C/D, which uses the 700MHz frequency band. However, most homes using C/D aerials should continue to receive reliable signals after clearance.

See areas with transmitters using group C/D.

Installers replacing aerials where signals are currently transmitted in this group are recommended to advise customers about clearance and offer a wideband model.

More information on wideband aerials is available here.

Some viewers may also need to install a small filter at the back of their TV to prevent interference once new mobile services launch. Changes to the 700MHz band will also affect equipment used in the Programme Making and Special Events (PMSE) industry.

Key points:

  • Freeview viewers will need to retune as clearance takes place
    region by region between 2017 - 2020
  • Most Group C/D aerials should continue to provide reliable reception.
    However, some will need to be replaced
  • Viewers replacing their aerial are advised to opt for a wideband model

When is clearance happening?

Clearance of the 700MHz band began in 2017 and Ofcom has confirmed its aim to release this spectrum in Q2 2020, following a review of progress in August 2017. Digital UK has been asked on behalf of the UK multiplex operators to co-ordinate the technical planning of the changes at TV transmitters, which will be implemented by Arqiva and will take place region by region. Around 90 per cent of main transmitters will require some re-engineering for clearance. Almost all of the 1,000 smaller relays in the network are likely to need work also.

Ofcom 700MHz clearance rollout mapCurrent rollout plan - simplified overview map (Ofcom)

Is there assistance for viewers?

Information on retuning and support for viewers during clearance events is available from the Freeview Advice Line and the Freeview website at www.freeview.co.uk/tvchanges

Coverage checker

Check the predicted Freeview coverage and channels available at a UK address.

Why do you need this?

Providing a house name or number makes your results far more accurate.